8 results ·
● Live web index
M
mdpi.com
article
https://www.mdpi.com/1996-1073/16/2/906
Development of a Model-Based Coordinated Air-Fuel Controller for a 3.0 dm 3 Diesel Engine and Its Assessment through Model-in-the-Loop. Comparison of Blade Aeroelastic Responses between Upwind and Downwind of 10 MW Wind Turbines under the Shear Wind Condition. Repair Parameter Design of Outer Reinforcement Layers of Offshore Wind Turbine Blade Spar Cap Based on Structural and Aerodynamic Analysis. The aim is to provide a snapshot of some of the most exciting work published in the various research areas of the journal. This paper proposes a two-level optimization criterion method for the optimal design of steel conical tower considering different structural reliability and uncertainty, along with the discreteness of design variables such as tower thickness and bolt type. In the first level, the tower shell geometry can be obtained by section design method; in the second level, bolted connections and flanges are designed based on the results of the first level. offshore wind turbine; tower design; two-level optimization; criterion method; section design.
S
scholarworks.uark.edu
research
https://scholarworks.uark.edu/meeguht/70
ScholarWorks@UARK ScholarWorks@UARK University of Arkansas, Fayetteville. ## Mechanical Engineering Undergraduate Honors Theses. # Design of Wind Turbine Tower Height and Blade Length: an Optimization Approach. ## Degree Name. Bachelor of Science in Mechanical Engineering. ## Degree Level. Historical wind turbine data shows that the tower hub height to rotor diameter ratio scales almost linearly. This study addresses this question by using an Excel based optimization program to determine the height to diameter ratio of a simulated turbine with the lowest cost of energy. Using a wind turbine power curve database and previous scaling relationships/cost models, the optimum hub height to rotor diameter ratio is predicted. The results of this simulation show that current cost and scaling models do not reflect an accurate optimum height to diameter ratio. However, these cost and scaling models can be modified to provide more accurate predictions of the optimum hub height for a given rotor diameter. *Mechanical Engineering Undergraduate Honors Theses* Retrieved from https://scholarworks.uark.edu/meeguht/70.
J
journals.sagepub.com
research
https://journals.sagepub.com/doi/10.1260/030952406779994150
A wind turbine tower optimization program was developed, using a genetic algorithm. This allowed a rational analysis to reduce the mass of turbine towers,
I
iro.uiowa.edu
research
https://iro.uiowa.edu/esploro/outputs/graduate/Design-of-wind-turbine-tower-a…
The present research seeks to understand how optimization concepts and Microsoft Excel's optimization capabilities can be used in the design of wind turbine
L
lidsen.com
research
https://www.lidsen.com/journals/jept/jept-08-01-003
3. Journal of Energy and Power Technology. *Journal of Energy and Power Technology* focuses on all aspects of energy and power. *Journal of Energy and Power Technology (JEPT)* is an international peer-reviewed **Open Access** journal published quarterly online by LIDSEN Publishing Inc. This periodical is dedicated to providing a unique, peer-reviewed, multi-disciplinary platform for researchers, scientists and engineers in academia, research institutions, government agencies and industry. The journal is also of interest to technology developers, planners, policy makers and technical, economic and policy advisers to present their research results and findings. This research demonstrates implementation of Taguchi Design of Experiment (DoE) in conjunction with Signal-to-noise ratio (S/N) to optimise both structural design parameters and material cost of a 90 m tower of a standard 5 MW WT tower subjected to adverse wind conditions. Model 1, made of steel grade S275, 95 mm wall thickness and 0.45 top-to-bottom diameter ratio, is found optimal.
T
themoonlight.io
article
https://www.themoonlight.io/en/review/offshore-wind-turbine-tower-design-and-…
The methodology employed in this paper is systematic and multifaceted, structured to enhance the understanding of OWT tower design and its optimization. Here's
P
p-e-c.com
article
https://p-e-c.com/en/wind-turbine-tower-design
# Wind Turbine Tower Design. At the same time, modern turbine design concepts require a lot of performance from the wind turbine tower design. * design and analysis of lattice towers for wind turbines or other applications. * innovative design solutions and design methods for economic tower designs. Design of the tower head. * design and structural analysis of all tower internals, e. * design solutions for all design details in the towers. However, the weld bushings usually have a negative impact on the fatigue strength of the tower shell because of the poor design category, in turn making higher shell thicknesses necessary. We have designed an innovative but simple solution to design weld bushings in a manner that they affect the tower shell as little as possible. Our patented solution *PE-90* is named after its main advantage: we achieve Design Category 90 or better for the tower shell.
A
arxiv.org
article
https://arxiv.org/abs/2502.02594
It provides an in-depth background on key areas such as design types, load types, analysis methods, design processes, monitoring systems,