8 results ·
● Live web index
G
geosyntheticssociety.org
article
https://www.geosyntheticssociety.org/wp-content/uploads/2021/05/BarryChristop…
In this application, stronger geosynthetics are required than those used for separation alone, thus the cost of the material is somewhat increased. Bid prices for stabilization geosynthetics are typically on the order of $1.20 to $3.60/m2. Cost tradeoffs should also be evaluated for different construction and geosyn-thetic combinations. This should include subgrade preparation and equipment control versus geosynthetic survivability. In general, stronger, higher survivability geosynthetics will [...] One example of a completed GRS-IBS is a small bridge project with a span length of less than 15 m and rated at less than 18 metric tons capacity constructed in Huston Township, Clearfield County, Penn-sylvania, USA (Albert, 2011). The actual cost of the bridge project was $102,000 and the cost savings were estimated at $48,000. Also, the entire project was constructed in 10 days start to finish, where nor-mally it would have taken more than a month. [...] In-place cost of geosynthetic barriers can vary from approximately $3.00/m2 to $19.00/m2. Cost of conven-tional compacted clay liners can vary between approximately $6.00/m2 to $30.00/m2 per meter depth in-place, depending on the availability and hauling distance. However, in these applications, the savings are not just from the cost difference between the geosynthetic and the replaced material, but more significant-ly from the value of the volume of space saved by using very thin geosynthetic
B
bpmgeosynthetics.com
article
https://www.bpmgeosynthetics.com/the-6-best-geotextiles-for-slope-protection
Slope failures cost infrastructure owners USD 1–3 billion annually in the US alone (USGS estimates); geotextiles mitigate this by 30–60% soil loss reduction under 50–150 mm/h rainfall, 25–45% FoS improvement on 1V:2H–1V:1.5H slopes, and 20–40% faster vegetation establishment (Geosynthetics Magazine, 2025–2026 field data). Nonwovens excel in filtration/protection (0.3–1.0 s⁻¹ permittivity), woven grades in reinforcement (35–100 kN/m tensile), and natural fibers in temporary bio-degradable cover [...] The global geotextile market reached approximately USD 7.5–8.2 billion in 2025–2026, with erosion control and slope protection applications accounting for 18–22% of total demand (equivalent to USD 1.35–1.8 billion), growing at a CAGR of 6.5–10.4% through 2031–2034 (Fortune Business Insights, Mordor Intelligence, MarketsandMarkets, Persistence Market Research, 2025–2026 data). Slope protection geotextiles — predominantly nonwoven needle-punched geotextile or continuous-filament polyester (PET) [...] | 5 | US Fabrics US Nonwoven (315ST/450T) | Needle-punched PP nonwoven | 200–450 | 1,000–1,800 | 2,500–4,000 | 0.50–0.70 | 0.18–0.25 | 180–260 | 0.75–1.40 | AASHTO M288 Class 1–2, NTPEP | 6–8% US DOT; highway embankments, municipal slopes |
| 6 | Propex Geotex Nonwoven (401/601) | Needle-punched PP nonwoven | 200–600 | 800–2,000 | 2,000–4,500 | 0.30–0.80 | 0.15–0.35 | 120–250 | 0.80–1.60 | AASHTO M288, NTPEP | 7–9% US; permanent slope covers, mining reclamation |
L
library.ctr.utexas.edu
research
https://library.ctr.utexas.edu/hostedpdfs/tsusm/0-6792-1.pdf
range of $40/ft2 of vertical height, depending on the site conditions and project requirements. For comparison, MSE walls in Maryland cost approximately $60/ft2 of vertical height. These unit prices are cost estimates for facing, but the cost of backfill must also be considered. They are inflated compared to the average bid price of $33.70/ft2 for MSE facing in Texas. However, if the cost ratio between the two construction methods is similar, GRSS facing in Texas could cost approximately [...] its final position. No measurement will be made for lapping of material, ties and grid anchor pins. The work performed and materials furnished will be paid for at the unit price bid for geogrid reinforcement for embankment. This price is full compensation for furnishing all labor, materials, freight, tools, equipment and incidentals, and for doing all the work involved in placement of the grid, complete in place. California DOT (2005) Geosynthetic reinforcement will be measured and paid [...] the overall cost of GRSS, including cut-fill requirements, slope size and type, existing soil type, available backfill materials and facing finish as well as temporary or permanent application. Cost estimates for construction are typically provided as the price per square foot of vertical face. For reinforced slopes, the approximate costs of the principal components are as follows: reinforcement 45–65 percent, backfill 30–45 percent, and face treatment 5–10 percent (Elias et al., 2001).
F
fcds.org.co
article
https://fcds.org.co/wp-content/uploads/2021/01/slope-stabilization-erosion-co…
alone. The average benefit-to-cost ratio in this study was 2.41, demonstrating that soil bioen-gineering can be a favorable economic alternative in road-side management. The cost of soil bioengineering at three sites in Washington State ranged from $1.50 to $3.50 per square foot (Lewis et al. 2001). Many interviewees stated that on slope stabilization projects in which they have participated, the overall cost of the soil bioengineering or biotechnical component represented about 1% of the total [...] other materials. Natural materials such as soil, rock, and timber are more environmentally compatible and are better suited to vegetative treatments or slight modifica-tion than are manufactured materials (USDA 1992). They may also be available on-site at no cost (USDA 1992). Mechanical stabilization techniques utilize nonvegetative or nonliving components such as rock, gabion baskets, con-crete, geosynthetics, and steel pins to reinforce slopes. These techniques can provide stability to both [...] are usually less restrictive, the structure is more tolerant of differential settlement, no facing element is required so they are typi-cally less costly, and erosion protection vegetation can be incorporated into the face of the slope. Useful Points • When using geosynthetics for reinforced soil slopes you need to match the type with the site-specific parameters (K. Mohamed, personal communication, April 26, 2011).
F
fortunebusinessinsights.com
article
https://www.fortunebusinessinsights.com/u-s-geosynthetics-market-105571
The U.S. geosynthetics market is reach to grow from $2.37 billion in 2021 to $3.59 billion in 2028 at a CAGR of 6.1%
Read More at:-
Subscribe Newsletter
Trust Online
DMCA.com Protection Status
Comodo Secure
Contact Us
Connect with us
Information
Recognized By
Comodo Secure
D&B D-U-N-S®
Number: 861494523
Great place to work
ISO 1
ISO 1
© 2026 Fortune Business Insights . All rights reserved
Top Arrow
to enhance your experience. [...] The U.S. geosynthetics market size was USD 2.27 billion in 2020. The impact of COVID-19 has been unprecedented and staggering, with U.S. geosynthetics witnessing a negative demand shock across the country amid the pandemic. Based on our analysis, the market exhibited a decline of -1.8% in 2020 as compared to the average year-on-year growth during 2017-2019. The market is projected to grow from USD 2.37 billion in 2021 to reach USD 3.59 billion in 2028 at a CAGR of 6.1% during the 2021-2028 [...] Geosynthetic materials are utilized in several construction activities to enhance drainage, control evaporation, limit erosion, and strengthen infrastructure to promote the structure's safety and longevity. Several functions of geosynthetics in civil engineering and construction include erosion control blanket to protect slope at the top, avoid erosion, basal reinforcement to support the soil reinforcement structure, and filtration behind all hydraulic systems.
M
mdpi.com
article
https://www.mdpi.com/2076-3417/16/5/2276
Geosynthetics is a planar product manufactured from different types of polymers and utilized in cooperation with soil, rock, earth, or other geotechnical-related materials as a homogeneous part of a civil engineering structure . Additionally, industries like mining and agriculture employ geosynthetics . They are distinguished by the kind of polymer, the kind of yarn or fiber, the kind of geosynthetic, and the thickness or mass per unit area used in the fabrication. Geotextiles are one type of [...] 36. Raju, J.; Ramesh, B. Performance assessment of geosynthetic reinforced soil slopes of different slope angles for sustainable construction. In AIP Conference Proceedings; AIP Publishing LLC: New York, NY, USA, 2025; Volume 3270, p. 020078. [Google Scholar] [CrossRef] [...] 120. Renken, K.; Mchaina, D.; Yanful, E. Geosynthetics research and applications in the mining and mineral processing environment. In Proceedings of the North American Geosynthetic Society (NAGS)-Geosynthetic Institute (GSI) Conference, Las Vegas, NV, USA, 14–16 December 2005; pp. 14–16. [Google Scholar-Geosynthetic+Institute+(GSI)+Conference&author=Renken,+K.&author=Mchaina,+D.&author=Yanful,+E.&publication_year=2005&pages=14%E2%80%9316)]
G
geofantex.com
article
https://geofantex.com/right-geosynthetic-for-slope-stabilization-needs.html
Skip to content
Tel: +86-411-39569550| E-mail: info@geofantex.com/geofantex@gmail.com
Geofantex Geosynthetics Logo
Geofantex Geosynthetics Logo
Blog
# Geosynthetics for Slope Stabilization: Types, Applications, and Engineering Solutions
WhatsApp us
C
carthagemills.com
article
https://carthagemills.com/geosynthetic-products
Erosion Control Blankets (ECBs) – Including double & single sided, and also short or long-term erosion solutions. Biodegradable options are also available.
Turf Reinforcement Mats (TRMs) – Permanent erosion control solutions for steep slopes, embankments, banks and also shorelines with heavy runoff.
Armormax System – Provides long-term erosion control and slope stabilization for up to 75 years. This product is also lightweight and easily transported to challenging job site locations. [...] Construction Film, also called Plastic Sheeting or Poly Sheeting, has a wide variety of uses in the construction industry.
Stormwater Products and BMPs – Including dewatering bags, silt fence, wattles, and also inlet protection.
Geocells – Cellular confinement systems used for erosion protection & stabilization in steep slope surfaces. Also used for ground stabilization on weak subgrade soils. [...] erosion
Yes, Carthage Mills offers Erosion Control Blankets (ECBs) – Including double & single sided, and also short or long-term erosion solutions. Biodegradable options are also available from Carthage Mills.
### What provides long-term erosion control for up to 75 year?
Armormax System from Carthage Mills – Provides long-term erosion control and slope stabilization for up to 75 years. This product is also lightweight and easily transported to challenging job site locations.